Skip to content
Huys Houthandel
Hardwood decking

Decking and fencing

Decking boards, thermowood, fence panels and gates.

Decking and fencing covers everything for outdoors: decking boards and joists, posts, fence panels, gates and fencing. There are also log cabin profiles for a garden shed or store, concrete gravel boards and posts, oak railway sleepers, woven mats, stakes and paddock fencing.

You can lay a deck in tropical hardwood, in pine, in thermowood or in composite. Each material looks different, feels different and ages differently.

Tropical hardwood is heavy and hard. Left untreated, it turns silver-grey over time; to keep the colour, you oil it. Padauk is the largest group, alongside jatoba, ipe, massaranduba, cumaru, tali, garapa, afrormosia and bilinga, among others.

Pine decking boards are pressure treated: treated under pressure so they resist rot better. They are lighter and softer than hardwood. Thermowood is timber made more stable and rot-resistant with heat, without chemicals, which also darkens it. There are decking boards in thermally modified ash and spruce.

Composite is a mix of wood fibres and plastic. It does not splinter and needs no oiling. There are composite boards in several colours, solid or hollow, often with a wood grain in the surface. There are also decking boards in bamboo.

Decking boards are smooth, finely or coarsely ribbed, or have an anti-slip profile, and often each face is different, so you choose which goes up. The usual sizes are 21 to 28 mm thick and 140 to 190 mm wide. Some boards have grooves in the edge for hidden clips: then no screws show.

Under the boards lie the joists: the battens you fix them to. They come in hardwood, usually 40 × 60 mm, often laminated and finger-jointed – short lengths glued end to end, so they stay straight. There are also aluminium joists.

For fencing there are posts in hardwood, pressure-treated pine and sweet chestnut, square or round, with post holders to set them in the ground. Fence panels come in pressure-treated pine and hazel, and there is chestnut paling on the roll. If you want concrete at the foot, there are concrete gravel boards and slotted concrete posts into which the boards and panels slide.

Gates come as single or double swing gates and as sliding gates, in afrormosia, padauk, keruing, sipo, thermowood and pressure-treated pine, often with cladding boards in a frame. For a narrow opening there are small gates in chestnut.

A deck is worked out in square metres (m²), fencing in linear metres: the length, from post to post. The material calculator turns square metres into boards, with a little extra for offcuts.

For a quote on a deck, give us the dimensions, the direction of the boards and the material; we work out the number of boards and joists. For fencing: the total length, the height, the number of corners and where the gate goes. A sketch helps. Torn between hardwood, thermowood and composite? Call us and we’ll think it through with you.

Good to know

Hardwood and thermowood
Padauk, jatoba, ipe and thermally modified ash.
Composite too
Does not splinter and needs no oil.
Posts, panels and gates
In hardwood, pine, chestnut and concrete.
Joists to match
Finger-jointed hardwood or aluminium.

Tell us what you need.

A question about sizes, quantities or prices? Send us a message or give us a call. We'll think it through with you.