Skip to content
Huys Houthandel
Stacked boards in the warehouse

Beams and construction timber

Douglas fir, oak and spruce.

Beams and construction timber is the timber for the structure of a building: beams and rafters for roofs, trusses and floors, battens, boards and formwork timber. Solid softwood and oak, and engineered beams for the long spans. We cut it to size.

Douglas fir is the largest group: from 30 mm boards to 200 × 200 mm beams, in lengths of almost 10 m. Usual sections include 63 × 175, 75 × 225 and 36 × 225 mm. Douglas fir is a softwood with a reddish-brown heart. Some of it is pressure treated.

Spruce, also called whitewood, and Scots pine, also called redwood, come sawn and planed, as battens, boards and beams up to 100 mm thick. Usual sections in spruce are 38 × 58, 38 × 89, 38 × 140 and 22 × 95 mm. Some of it is planed construction timber with rounded edges, and much of it is pressure treated.

Oak beams are heavy and hard, for trusses and for beams that stay on show. They come sawn, from 100 × 100 to 300 × 300 mm and more, and up to just over 7 m long. Some are part-dried: they have already had time to dry.

There is also larch, Oregon pine, pitch pine, yellow pine, hemlock and poplar, and spruce for formwork.

For long spans there are engineered beams. Glulam is made of layers of softwood glued together into a beam that stays straighter and more stable than one solid piece. LVL is built up the same way, from thin veneers. I-joists have the shape of an I: two flanges top and bottom, with a board between them. All three come in lengths up to 13.5 m.

For the roof there are roofing battens and counter battens, pressure treated and in bundles. There are also bevelled formwork battens, scaffold boards and safety boards.

Construction timber comes sawn, with a rough sawn face, or planed: smooth and to exact size. Pressure-treated timber has been treated under pressure so it resists rot and insects better. Tell us in your request how you want it.

Construction timber is worked out in cubic metres (m³), or in linear metres: the length, whatever the section. The material calculator turns pieces into cubic metres and linear metres.

For a quote, give us the species, the section (thickness × width, in mm), the length and the quantity of each piece, and whether it should be planed or pressure treated. A cutting list or a plan can also be a photo. For engineered beams, include the span; the structural calculation is for your architect or engineer. Not sure about the species or the section? Call us and we’ll think it through with you.

Good to know

Cut to size
Give us your sections and lengths.
Douglas fir, oak and spruce
Also Scots pine, larch and Oregon pine.
Engineered beams
Glulam, LVL and I-joists up to 13.5 m.
Sawn or planed
Also pressure treated, against rot and insects.

Tell us what you need.

A question about sizes, quantities or prices? Send us a message or give us a call. We'll think it through with you.