Skip to content
Huys Houthandel
gevelbekleding

Cladding

Cladding boards in hardwood and thermowood.

Cladding at Huys Houthandel is mostly timber: cladding boards (planchetten) and profiled boards (sponden) in hardwood, softwood and thermally modified timber. There are also fibre cement cladding boards and the trims to finish a facade. You choose the material, the profile and the size, and we work out how much you need.

Planchetten are the boards you clad a facade with. They come flat, with a V-joint or as weatherboard, where the boards overlap, and some are made to be fitted vertically. Sponden are wider, profiled cladding boards, often with a nose and a groove, up to 290 mm wide.

In hardwood there are cladding boards in padauk, afrormosia, oak, meranti, afzelia, sipo and iroko, and profiled boards in cambara as well. Cedar is included too. In softwood, there is spruce, Scots pine and larch.

A large part of the cladding is thermally modified: timber made more stable and rot-resistant with heat, without chemicals. It makes the wood darker. There is ayous, spruce, ash and frake. Thermally modified ayous comes as a cladding board, as a vertical cladding board and as a profiled board, in several profiles.

Some boards come already finished, for example brushed and black, or grey. And not every cladding board is for outdoors: a few, such as some in oak, are meant for indoor use. If in doubt, ask.

If you don't want timber on the facade, there are cladding boards in fibre cement and other materials, with the corner and finishing trims that go with them.

Cladding is measured in square metres (m²): the area you cover. A section is, for example, 21 × 130 mm in thermally modified ayous, or 15 × 130 mm in afrormosia, and for some boards the lengths go beyond 5 m. The calculator turns square metres into boards, with a little extra for cutting waste. With weatherboard and boards with a nose and groove, a board covers less than its full width, because part of it disappears under the next. Then calculate with the width that stays visible, or let us work it out.

For a quote, give us the dimensions of the facade, without windows and doors, with the material and profile you want. Tell us too whether the boards go horizontal or vertical: not every profile is made for both. A sketch or a photo of the facade helps. We work out the number of boards and the lengths. Not sure which profile or timber suits? Call us and we'll think it through with you.

Good to know

Cladding and profiled boards
Flat, V-joint, weatherboard or nose and groove.
Hardwood and softwood
Padauk, afrormosia, oak, meranti, cedar, spruce and larch.
Thermally modified
Ayous, spruce, ash and frake.
Fibre cement too
Cladding boards without timber, with finishing trims.

Tell us what you need.

A question about sizes, quantities or prices? Send us a message or give us a call. We'll think it through with you.